Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Kent, WA

Wayne Dalton Garage Door Installation in Kent, WA

New steel, insulated, wood-look and carriage-style doors, measured and professionally installed. Typical cost $1,200-$4,500.

When your door needs Wayne Dalton garage door installation, you want it done safely and right the first time. Typical jobs in Kent, WA cost $1,200-$4,500, and you approve the price first. New steel, insulated, wood-look and carriage-style doors, measured and professionally installed. Our technicians service Wayne Dalton garage doors regularly and know where the model and date labels are, which makes ordering the right part quicker. Wayne Dalton is part of the Overhead Door Corporation. Many Wayne Dalton doors use the TorqueMaster spring system, with the springs sealed inside the torsion tube, so spring work needs TorqueMaster parts and a different procedure.

Is it time for Wayne Dalton garage door installation?

  • Several damaged panels or a rusted-through door
  • No insulation in an attached or heated garage
  • An outdated look that hurts curb appeal
  • Repeated repairs on an old door

What usually causes it

  • Doors typically last 15-30 years depending on material and care
  • Storm or impact damage
  • Updating the home's look or efficiency

Safe checks before you call

  • Measure the opening width and height, plus the headroom above it.
  • Decide on insulation, windows and style before choosing a model.
  • Ask whether wind-load requirements apply in your area.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

Our Wayne Dalton garage door installation process

  1. Measure the opening, headroom and side room
  2. Help you choose material, insulation, style and color
  3. Remove and haul away the old door
  4. Install the new door, tracks, springs and seals
  5. Balance it, connect the opener and test it

Typical Wayne Dalton garage door installation prices

$1,200-$4,500Typical range, parts & labor
4-6 hoursTypical time on site

What moves the price:

  • Door size and weight (single or double, steel or wood)
  • Which parts need replacing and whether they are in stock
  • Spring type and cycle rating
  • Emergency or after-hours timing

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Other Wayne Dalton services

Local Wayne Dalton garage door installation for Kent, WA

For Washington homes, steel, composite or properly sealed wood doors with a good bottom seal hold up best in long wet seasons.

Besides Kent (ZIP codes 98030, 98031, 98032, 98035, 98042 and more), we handle Wayne Dalton garage door installation in East Hill-Meridian (3.5 mi), Lakeland North (3.8 mi), Des Moines (4.4 mi) and Lea Hill (4.5 mi). Call (833) 435-8883 to book a visit in Kent.

Wayne Dalton Garage Door Installation: frequently asked questions

How much does Wayne Dalton garage door installation cost in Kent, WA?

Wayne Dalton Garage Door Installation typically costs $1,200-$4,500 including parts and labor, and usually takes 4-6 hours. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do Wayne Dalton garage door installation the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is Wayne Dalton garage door installation covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty, and Wayne Dalton warranty terms vary by product and age. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Washington or Kent requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my garage door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the garage door is near the end of its life, replace it. A garage door typically lasts 15 to 30 years. If several panels are damaged, the door is rusted through or rotted, or parts are discontinued, replacing it is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Kent, WA

Garage Door Sensor Repair

Photo-eye sensors realigned, rewired or replaced so the door closes reliably.

Typical $100-$250

Hörmann Opener Gear & Sprocket Replacement

Stripped drive gears replaced so the motor moves the door again.

Typical $125-$275

Haas Door Off-Track Garage Door Repair

Haas Door, based in Wauseon, Ohio, makes residential and commercial sectional and rolling doors.

Typical $175-$450

Marantec Garage Door Sensor Repair

Marantec is a German manufacturer of residential and commercial door openers.

Typical $100-$250

Garage Door Opener Repair

Openers that hum, click, reverse or won't respond, diagnosed and repaired.

Typical $125-$350

CHI Overhead Doors Garage Door Roller Replacement

CHI Overhead Doors builds residential and commercial sectional doors in Arthur, Illinois, and sells them through independent dealers.

Typical $150-$350

Midland Garage Door Garage Door Repair

Diagnosis and repair for doors that are stuck, noisy, crooked or won't open or close.

Typical $150-$450

Haas Door Garage Door Track Repair

Haas Door, based in Wauseon, Ohio, makes residential and commercial sectional and rolling doors.

Typical $150-$400

Windsor Door Garage Door Track Repair

Bent, loose or misaligned tracks straightened, realigned or replaced.

Typical $150-$400

Amarr Off-Track Garage Door Repair

Amarr, an ASSA ABLOY Group brand, makes residential lines such as Classica, Heritage, Lucern and Oak Summit, as well as commercial doors.

Typical $175-$450

High-Speed Door Repair

Fabric and rigid high-speed doors repaired and recalibrated.

Typical $400-$2,000

Chamberlain Garage Door Sensor Repair

Chamberlain is the retail line of The Chamberlain Group, sold at home centers. It uses the same Security+ 2.0 remote technology and myQ app as LiftMaster, so many accessories work with both brands.

Typical $100-$250

Garage door stuck, noisy or broken?

Talk to a garage door technician in Kent, WA now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote